English
简体中文
名称描述内容
产品中心
40G 光电平衡探测器 Balanced Photodetector U2T (Finisar) BPRV2225/ BPRV2125A
发布时间: 2018-05-21 16:02
The optical modulator is double fiber tail fiber input,rate 43Gbps,can be applied to DPSK system;RF interface GPPO,differential output; differential conversion gain 2800V/W,3dB cut-off frequency 31GHz,output voltage swing 600mV.
Description
The Balanced photo-receiver module BPRV2125A is a differential front-end for 43Gbits/s DPSK-applications featuring high differential gain. The photo-receiver module contains two waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) within one small form factor SMD-package. The Receiver is therefore well suited for DPSK and DQPSK applications at 40G and 100G with rates between 20G and 56GBaud.
The DC output voltage can be monitored for OUTN and OUTP independently. For each amplifier path a threshold control at a linear amplification stage should be applied to ensure an optimized differential output signal.
An excellent electrical and optical phase propagation is achieved by a total skew of lower than 5ps between the balanced signal paths.
Features
Application
The Balanced photo-receiver module BPRV2125A is a differential front-end for 43Gbits/s DPSK-applications featuring high differential gain. The photo-receiver module contains two waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) within one small form factor SMD-package. The Receiver is therefore well suited for DPSK and DQPSK applications at 40G and 100G with rates between 20G and 56GBaud.
The DC output voltage can be monitored for OUTN and OUTP independently. For each amplifier path a threshold control at a linear amplification stage should be applied to ensure an optimized differential output signal.
An excellent electrical and optical phase propagation is achieved by a total skew of lower than 5ps between the balanced signal paths.
Features
- Hermetically sealed SMD package with two GPPO connectors
- Balanced PIN / LA photo-receiver module
- 500mV differential output swing and very low skew
- Wavelength range: 1530nm~1620nm
-
Dual optical input, differential RF output with voltage swing of Max.600mW
- Typical 31GHz 3dB cut-off frequency
- Differential conversion gain 2800V/W @ 1550nm
- Sensitivity -10dBm@1550 nm
-
Differential DC (BPRV2125) or AC (BPRV2125A) coupled output with threshold control option
Application
- 43 Gb/s DPSK communication systems
- Transponder and line card designs
- Radio over fiber
